[China Glass Net] The development of China's glass cutting machine products is greatly affected by similar foreign products. Generally, it is completely copied and partially imitated. The investment in R&D of the whole industry is very small, and it differs greatly from foreign products in terms of machinery and control. The foreign control system is not well understood, and it only stays at a simple application level. The manufacturing of machinery is limited by the domestic raw materials and processing level, and only stays in the same shape. As a result, the field of high-end glass cutting machines has always been a foreign brand. At present, domestic large-scale glass enterprises use more than 80% of glass cutting machines in foreign brands.
So today, with the rapid development of science and technology, with the rising labor cost, especially the customer's requirements for product accuracy are becoming more and more strict, the efficiency requirements of enterprises are getting higher and higher, and the result of glass optimization software is used for manual cutting. Gradually and inevitably replaced by glass cutting machines, this trend has now gradually extended from large glass processing enterprises to medium-sized enterprises and some large door and window manufacturing industries.
So how do you choose a glass cutter as a growing company?
Take the automated shaped glass cutting machine as an example. Pay attention to the following points when purchasing:
1. Selection: According to the actual cutting layout of the enterprise, choose the one that is more suitable for oneself, that is, what kind of glass is to be cut, that is, to consider the basis of the layout, do not wear big shoes with small feet, because it involves the normal wear and tear of the equipment and Unnecessary capital investment.
2. Cutting accuracy: According to your actual needs, this can not be seen directly from the introduction of the product manual and the manufacturer's words, mainly in the technical deep research, such as: the control of the cutter wheel, the running-in of the rack and pinion, the design Reasonable, control the level of the system and then measure in the actual cut. In this way, the level of synchronization control of the cutting machine part and the control system can be fully grasped.
3. Cutting speed: The speed can be discussed under the premise of satisfying the cutting precision. Since the eye is difficult to judge whether it reaches a higher speed, the software simulation function of the servo drive of the cutting machine can be used to check whether the motor speed can be reached. Higher.
4. Automatic typesetting optimization function: Due to the special nature of its work, it is generally rare to arrange people with high education or level to work, so the operation of the cutting machine is required to be simple, easy to understand, safe and stable. Maintenance is simple, avoiding the embarrassing situation that affordable equipment can't afford equipment. Optimization should be applied to your own actual situation, can not pursue 100% optimization rate, resulting in can not be cut, work efficiency is reduced, can not be fully optimized according to the manufacturer's specifications, because the domestic original glass is not refined, causing the cutter to fall off the knife, and the special shape cutting The graphics library is flexible and flexible, and can import CAD and Solidworks software graphics files into the library.
5. Maintenance is simple and convenient: the input and output and mechanical sensors should not be equipped too much, and unnecessary switches and indicators should be as small as possible, because once a certain device on the machine fails, it will affect the use of the cutting machine. The fewer the parts, the simpler the design, the lower the probability of failure, the less wiring, and the ease of finding faults and replacing parts. Moreover, it is better to debug the status of each input and output signal on the display screen, and the maintenance cost is an important factor that must be prioritized when purchasing the device.
Hongxiangwen is a professional manufacturer of hook loop straps, and produces and sells a variety of derivatives of hook loop straps. Our Bike Straps are dedicated to providing you with professional bike auxiliary equipment, bringing you the best cycling experience. Our Bike Strap products include Bike Chain Protector, Hook Loop Strap With Buckle, Elastic Armband, Pedal Strap , Bike Bag . The bicycle chain protector effectively protects the bicycle frame from the friction of the bicycle chain. The hook loop strap with buckle plays a binding and fixing role in various places. The reflective elastic armband adds a safety guarantee for night riding. The pedal strap plays an auxiliary role in riding. The bicycle bag is convenient to store all kinds of articles you carry with. If you have any demands or questions, please feel free to contact us.
Bike Strap
Bike Straps,Bike Pedal Strap,Bicycle Pedal Strap,Bicycle Pedal Foot Strap,cycling mask
Shenzhen Hongxiangwen Hook&Loop Co.,Ltd , https://www.hxwsports.com